B&M Short Shifter

Here are pictures of the installation process of the B&M short Shifter.

The installation wasn't too bad, I had some troube getting to one of the bolts but other than that, it was pretty simple.

Here is the Shifter to be installed

This is how the stock shifter looks when the center consol and boot are removed.

This picture shows the four bolts needed to be removed to removed the shifter. The top right bolt was not easy to get to, I had to used a wrench handle to pry the transmission away from the right side so I could get a wrench on that bolt.

When the shifter is removed, the hole will look like this.

Here is the B&M bolted into place.

The Dust boot is put on the protect the shifter